Basic Info.
Automatic Grade
Automatic
Transport Package
According to Customer Requirements
Specification
W1480*L14600*H1570
Origin
Dongguan Guangdong, China
Product Description
equipment overview
Flat surface printing silver ink baking
The material is collected manually after being heated by the conveyor belt and cooled by an infrared drying oven.
Infrared drying oven is based on infrared heating and hot air heating way, often material by surface temperature 150 ºC, material surface cross all left right temperature uniformity degree + / - 2%.
Equipment specifications and main technical specifications
| Transportation | 1. Use rice yellow teflon 4*4 breathable transport network, 800mm wide.
2. Net deviation automatic adjustment mechanism and limit protection device.
3. Adopt frequency converter to adjust freely without segment speed, with the speed range of 0.5-3 m/min.
4. Advanced fully dense gear reducer motor drive. |
| External dimension | 1.L16000mm x W1480mm x H1530mm
2. Feeding section 1000mm
3. Heating section: 12000mm (divided into 5 temperature zones, 2400mm each)
4. Cooling section 2000mm
5. Output section 1000mm
6. The conveying network is 880+20mm high from the ground |
| Heating method | 1. The heating section consists of 12 meters, with infrared irradiation, electric heating and hot air circulation heating, which can independently control the infrared output.
2. Adopt PID temperature controller, cooperate with SSR component phase output control, and control temperature quickly and stably.
3. Material information often surface temperature 150 ºC, material surface transverse left right temperature uniformity degree plus or minus 2%.
4. Set the furnace temperature Max 180 ºC. Commonly used temperature 150 ºC.
5. Heating segment set rock wool heat air and heat insulation, minimum influence on cold room, the surface temperature is higher than room temperature 10 ºC.
6. The inlet and exhaust air doors can be adjusted to effectively control the micro-pressure in the furnace.
7. The upper cover is opened with automatic lifting and lifting of electric cylinder, which is easy, safe and convenient.
8. Adopt air circulation and return air in the furnace to reduce heat loss and save energy.
9. Hot air is designed from the top down to flow type. Prevent material displacement and dust rise.
10. The air duct in the furnace is provided with a high efficiency filter efficiency of 99.97%,Class1000, which has a temperature resistance of 250 through the filter network to ensure the cleanliness of the furnace. |
| Air supply mode | 1/2 HP high-temperature long-shaft motor combined with wind wheel is adopted to blow to the surface of the product from the top down through efficient filtration and recover from the bottom. Each temperature area *2 groups, a total of 10 groups. |
| Cooling method | 1. Use strong fan to cool the surface of the product.
2. Strong wind fans are used below to discharge hot air outdoors, with upward and downward convection. |
| Electric heat distribution | Medium wave transparent heating tube 800W*21 pieces/group, a total of 5 groups. |
| Furnace body material | 1. The external steel plate is treated with anti-rust high temperature paint, and the sheet metal seal plate is around the base
2. The interior adopts SUS201#1.5t mirror stainless steel plate. |
| Protection device | 1. In addition to the main temperature control and the upper and lower limits of temperature overheat protection, the auxiliary temperature control overtemperature protection device is set as the most safe temperature protection device, and the alarm warning is given when the overtemperature control and the upper and lower temperatures overheat prevent the return of the track, automatically check the power system to prevent accidents.
2. Put anti-phase protection on the transmission motor to prevent over-temperature after reverse phase, resulting in product failure and equipment damage.
3. Emergency stop switch, over-current, overload protection and linkage of all electric circuits in each heating section.
4. In case of frequent occurrence, the indicator light and buzzer alarm shall be coordinated, and the operator shall rule out the occurrence. |
| System control | 1. Taiwan sintek program controller.
2. Taiwan waylon man-machine interface.
3. Three-color indicator light: red, yellow and green light shows the instant status of the machine. |
product pictures
About us
Dongguan zhengkai electromechanical equipment co., LTD. Is mainly engaged in professional manufacturers of TP, LCD, FPC, PCB and other industrial equipment, and has a group of professional engineers and technical backbones. It has many years of professional experience in r&d, design and manufacturing equipment, so as to provide customers with high-quality after-sales service and expand business
Adhering to the business philosophy of "science and technology innovation and honesty", the company takes the customer as the center and serves the customer as the tenet, spares no effort and makes rapid response
continuously improve to make the customer satisfied, and develops and expands together with the partners.
Address:
No. 88, Jiangnan South Street, Xiagang Community, Chang ′an Town, Dongguan City, Guangdong Province, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Our company supplies different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
